proper jumper settings list for ms-8216 used as a addon dvd player with a standard cd rom one has to be master,one has to be slave jumpers next to power plug Set the jumper to the 2 middle pins
...dvd drive firmware setting is it master or slave Typically the master/slave setting is done with jumpers on the back of the drive. Look at the connection at the back and look for markings for ...
...jumper setting I need to set to tell that there are 2 different. Help please If the CD drives are parallel type (with a wide data cable connecting them to the motherboard), one must be set as the ...
...jumper setting, any advises?? I usually set all the drives to cable select and let the machine bios figure it out. However if you want to manually set the jumpers here is the best way I have found. ...
...Master/Slave jumper set correctly on the back of the drive? If the drive is on a cable with another drive of any type, one must be master and the other slave. Also, double check that the ribbon cable ...
...you will need to look on the drive for the settings for master / slave, and set the drive appropriately. ...
...jumper settings may or may not be correct; in some systems, even having the IDE cable placement and jumper settings correct may still leave errors such as this. Basically if you dink around with the ...
Question about Artec Computers & Internet
master. jumper was on first set of pins when it was a master now i want it to be a slave Put the jumpers on the pair in the middle and connect the unit with the connector from the middle of the cable.
...settings are usually stamped in the casing of the drive above each set of 2 pins as follows Ma,Sl,CS. The jumper just pulls off although you may need a small screwdriver or pair of tweezers to enable ...
Question about Lite On Computers & Internet
...jumper settings for Master/Slave, & cable select. I cannotput my hands on a manual and am moving it to a new system. Thanks. //Jim// Hello, There are three jumpers on the back of the unit marked ...
7 questions posted
Usually answered in minutes!
2 Questions
1 Questions
1 Questions