...Flip the watch over and look around the edge. There will be small slots. A thin blade like a pocket knife will open the back cover. Carefully, put the knife blade into the slot and twist it open. ...
...Flip the watch over so the arrows are pointing upward.Align the holes in the remaining links. Insert the rounded edge of one of the pins into the open link hole. The pin will go in without trouble ...
...flip it over to expose the back.
Now, take a thin, strong blade (I used a butterknife) and pry off the back plate. There's a tab on the upper right edge of the back plate to make this much ...
...Flip over your pocket watch. Remove the back of your watch. The back of watches are either screwed on by four small Phillips head screws (unscrew them) or the watch has a press inserted back (slide a ...
...flip the watch upside down and have a good at the back of the watch bracelet. If you look carefully you are going to see notches on the back of each link with an arrow pointing in. This is where the ...
...the watch face down with a large washer bigger than the crystal. It slip on the washer so I just flipped over my table mat on and it had a nice foam so it did not slip. I used the C-Clamp and
1,052 questions posted
Usually answered in minutes!
28 Questions
21 Questions
18 Questions
20 Questions
21 Questions
