Question about Bose Audio Players & Recorders
...bass input. I tried taking the bass output from the amp to the center speaker input but that doesn't work your bass box woofer driver is bad. Need to replaced the driver board. There no easy
...output. The good news is that you can use either a "line out" jack or a "tape out" jack instead, which most receivers do have. These jacks always have the signal, so there are no special settings to ...
...output the bass from these 2 channels. Another option is to use a mono to stereo (2 to 1) phono cable where the 2 connectors at one end connect to a tape or record output on your amplifier and the ...
...will increase bass output by 6 db. if the sub is simply a sealed box, it can also flatten the response if the driver is pointed sideways. If it's a band pass box (ported), this may not work as
Question about Acoustic Research Audio Players & Recorders
...bass output of your system. If you only have one sub-out on your receiver simpley run a 10ft rca from the sub-out of reciever to the rca input of either speaker than use the rca out of 1st speaker to ...
Question about Bose Audio Players & Recorders
output from subwoofer) to the speaker jacks on the receiver. Why not bypass the subwoofer and connect the 5 surround speakers directly to the receiver? Looking for best way to connect these components
Question about Sony Audio Players & Recorders
I'm trying to connect a small bass speaker to a Sony micro system There is no place in the picture that would connect a bass speaker to your system. The outputs are for full range speakers so a sub ...
...V-K, and i tested all lines with speakers set up and all 5 cubes speakers are work, except the bass. I turned off the power on unit all 5 speakers still working except the bass. Line subwoofer ...
...bass output I accidently turned off my bass on my Sanyo DWM-2500 and i have no remote to turn it back on. How can i turn the bass back on without using the remote? I somehow turned it off using the ...
...but with no punch. i have a dj mixing table from denon x 1500s a 2 denos cd 3500 get a bass amplifier and connect to the subwoofer. make sure you are useing a balanced output from your mixer not ...
12 questions posted
Usually answered in minutes!
151 Questions
87 Questions
76 Questions
51 Questions
54 Questions