Jl Audio 500/5 Car Audio Amplifier "ohms amp" Questions

Ad

Question about Alpine Car Audio & Video

1 Answer

amp is rated at 600w at 4 ohms and 1000w at 2 ohm so as long as you calculate your speakers to match the ohm specs of the amp you can hook up parallel = pos to pos and neg to neg of the 2 speakres 2 -

Ad

Question about Kicker Car Audio & Video

1 Answer

...ohms + on amp output to + on speaker #1 to + on speaker #2. - on amp output to - on speaker #1 to - on speaker #2. This is a parallel circuit....4 ohms in parallel with 4 ohms = 2 ohms. IF it were ...

Ad

Question about Sony Car Audio & Video

1 Answer

...in paralell to one output the load will be too low (1.33 ohms)& could blow your amp ! If you wire them in series to one output you will get a 6om load which will be fine also but with less

Question about Car Audio & Video

1 Answer

...minus to amps minus) this will result in 2ohm speakers. if your amp does 4 ohm then use either one speaker for 4 ohm or two speakers in serial connection (in row) but you will have then 8

Question about Jl Audio Car Audio & Video

2 Answers

...series. Most amps will put out about twice as much power at 2 Ohms vs. 4, but this amp is designed to put out about the same. Hope this helps! http://www.hifisoundconnection.com  HAS YOUR ...

Question about Car Audio & Video

2 Answers

...amp and so on with neg wires is this 4 homs? The easiest way to think of wiring voice coils and subs is this: Two items of the same impedance in parallel = Half of the impedance 4 ohms in parallel ...

Question about Alpine Car Audio & Video

1 Answer

...and also use less power. If you connect the amp rated at 4 ohms into a one ohm impedance, it will output and use more power but at the risk of having it burn out since you are over driving the

Question about Car Audio & Video

1 Answer

...amp for a final load of 2 ohms. If your subs are the 2-ohm version, I would recommend the Rockford-Fosgate Punch P1000-1bd which is stable at 1 ohm. Crutchfield sells it for $349.99. With the Punch ...

I'm having problems getting full power to my sub. I have a single channel bazooka amp and a 10'' mtx jackhammer. The amp is 2 ohm and the speaker is 4 ohm. Can I bridge by using 1 channel? A 2 ohm ...

Question about Legacy Audio Car Audio & Video

1 Answer

i have a 2500 watt legacy ice amp and im tryin to hook it up to two 900 watt rms soundstreams daul voice coils whats the best way If you amp is 1 ohm stable you can run + to +, - to - on each voice ...

Not finding what you are looking for?
Jl Audio 500/5 Car Audio Amplifier Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top Jl Audio Car Audio & Video Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you a Jl Audio Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...