...wire it to this amp and what setings on this amp alpine mdr m1005 1000watt amp using these subs will limit you to a 4 oh load to the amp witch will only let the amp produce half of it's power. the ...
...wire per amp - any shorter and it's a struggle to mount the amp close enough to a ground point. As above, the main power wire to the battery should be 1/0 gauge. Lastly if a 1/0 gauge kit is not ...
...bridge amps really. If you want more power then buy a bigger amp. The AV cords will go from your deck to your amp right to right and left to left. That's the way to wire your amp. ...
Question about American Pro Car Audio & Video
...amp turn on wire from the amp. then get a small wire then strip back both ends with a wire stripper only exposing enough for the copper wire to show. then touch one end to the 12volt on the amp and ...
...amp remote wire behind your head unit (if don't have a wire labeled amp behind the head unit then it usually a blue and white wire). The power lead from your battery connects to the 12v or PWR ...
Question about Alpine Car Audio & Video
i touched two speaker wires together and amp will not respond i touched tow speaker wires together and of course the amp stopped. then i tried it about three hours later and the amp worked but i had ...
...wire for your amp any other way you are asking for major electrical problems. You need to have a piece of 8 Ga. wire running from your battery all the way to your amp, also need to have a very good ...
...wire is not grounded properly the amp will go into protection mode so that the amp doesn't short out. 2) The speaker wires aren't hooked up either in the amp or box. Sometimes the wires just fallout ...
...wire b/w amp and sub. I hope i solved your problem how do i wire 3 sub to one 4 channel amp All you have to do is run the power wire from your battery to your capacitor and then connect both sub amps ...
50 questions posted
Usually answered in minutes!
196 Questions
131 Questions
85 Questions
67 Questions
46 Questions
