Question about Kenwood Car Audio & Video
red light stays on no sound. rca cable grnd, must be connected? the rca cable ground is not connected. is that the prob? are they special cables that are grounded or you just put a seperate wire to a ...
Question about Sony Car Audio & Video
the speakers just pulse when you plug in the rca jacks pn a sony xplod xm-zr1852 Depending on the amp, you may have a bad ground on the rca's. The best way to determine if you have a bad rca ground it
Question about Jl Audio Car Audio & Video
Broken RCA / phono jack - where to find new part? I physically broke the left channel RCA input jack on my 1000/1 amp. The jack broke off of the PCB into many pieces. As a temporary fix, I soldered my
RCA cable use Hello, I have two 4- channel amplifiers that I am going to use to power my subwoofers. one 4-channel amp. for one sub. and the other 4-channel amp. for the other sub. I have used RCA Y ...
what could be wrong if the red light is on it comes on once i plug my rca wires in If the red light goes off (out of protection mode) when you unplug RCA cables, You may have a break in your RCA ...
RCA INPUT JACKS MY MA AMP RCA INPUT JACKS ARE NOT RESPONDING TO RCA CABLES, I EVEN CONNECTED A NEW PAIR OF RCA CABLES AND MY AMP IS NOT PUTTING OUT ANY SOUND. ANY suggestions would be greatly ...
i was bumping one day and my rca broke off in the amp. i got it out by drilling it out and now it wont work unless if i tape the posative rca sideways on the rca jack and i have to leave the negative ...
...a volt meter on the ac scale of volts and put the red probe in or on the center leg of one of the rca's coming out of the radio and the black one on the metal round outside portion of the rca and ...
RCA amp problem When I plug my RCA cables into my amp it goes into protection mode! Why? You have a ground fault. Check all ground wires and then make sure the rca cables are not broken in any places.
Question about Car Audio & Video
My amp suddenly stopped working. Orion-Cobalt 800.1 RCA Problems. My amp suddenly stopped working. I get a test light to test all the outputs while the amp is conected completely. My controller plugin
215 questions posted
Usually answered in minutes!
131 Questions
85 Questions
67 Questions
48 Questions
46 Questions