Jl Audio 500/1 Car Audio Amplifier "amp clip" Questions

...clip then your amp is too small for your needs and your need to invest in a larger amp for more power...Look for RMS watt ratings at 12-14 volts not max watts at like 16-18volts (those are fictious ...

amp is just starting to clip (distort) because you are pushing either the amp or the subs or amp and subs to their limits. Clipping is not a good thing, but at the same time it usually sounds the best

...from the amp. Did the clip light go out? No?? Ok take out the amp and send it to the service center as unless your a tech, there are no user serviceable parts inside as its all solid state. Good ...

...clip? tWhen i crank it its all okay and if i try to crank it more my amp starts clipping, last time it did this it started making a burning smell and i could see some smoke, I immediately turned it ...

...amp cuts out and proceeds to clip. The power ligh start to blink. hi first disconnect all spks, then turn on the amp. if amp power lite stays on bright then proceed to connect one speaker or sub to ...

how to fix clipping my amp has the red light on and heard that it is when the amp is clipping how can i fix that turn down your gain levels. is the protection turning on? also make sure u aren't ...

...amp infinitys clip to keep from distorting, distortion played through a subwoofer at high volumes is damaging to the subwoofer and the amplifier. reduce your gain, and check your wires, the clipping ...

...wires the Better amp will perform, Will not clip signal as easy and Current draw may be lower because your not clipping signal. A clipped signal is close to DC and Amp or speaker will eventually

amp and clip the rest. MAKE SURE THE WIRE IS CLIPPED CLOSE. IF IT TOUCHES THE AMP IT WILL SHORT! As for the terminal, clip the ring off the wire and unwind the wire just as before. When you look at it

when i turn up the volume on my head unit my amp goes into protect mode or when i turn up the bass You likely have a speaker with a swollen voice coil. Voice coil becomes hot due to under powered amp ...