Question about B&W Audio Players & Recorders
...amp; the remote will not operate my itouch. (it used to work fine). if it charges, and there is no red flashing light, probably the board that feeds the arm, or the arm itelf, as different ipods have ...
for two years it occurred to me that I could just plug an aux cord into the back and one into my ipod. Works perfectly now....although the dock is now used more for holding & serves little utility
Question about B&W Audio Players & Recorders
...aux input at the back, if this works, the fault is most likely the arm, if it does not work, then it could either be the interface board above the amp, of the actual connections on the back of the ...
aux in gives the same result. Taking the unit apart, it's hard to remove the circuit board for the amp to get to the speaker wires. It's also hard to open the speakers themselves as that part seems to
Question about B&W Audio Players & Recorders
...aux input does not work, then the main board/amp/pse could be an issue. if the model is more than six months old it will probable have the known problem boards, so contact b and w servie and they ...
...amp; alarm clock for ipod? Press the POWER button so it turns on to either AUX, IPOD or FM and then press and hold SET for about 4 seconds. The time should begin to flash and then you can use the + ...
Question about iHome Audio Players & Recorders
amp;#39;t work. Has anybody had success troubleshooting thi Tried connecting & reconnecting Bluetooth connection twice. Speaker is fully charged. I tried restarting my iPhone completely, still no dice
8 questions posted
Usually answered in minutes!
117 Questions
73 Questions
69 Questions
61 Questions
44 Questions