Kicker DCVR122 -- 2 Ohm Dual 12in CompVR Vented Enclosure 05DCVR122 Car Speaker "jumper wire" Questions

Ad

Question about Car Audio & Video

1 Answer

...jumper wire" from one negative to the other and the same with the positives, one of the connection points will have two prongs to connect to, when one of them is occupied with the "jumper wires", use ...

Ad

Question about Sony Car Audio & Video

1 Answer

A simple way is to jumper a short wire between the power and remote terminals. Wire the jumper through a SPST switch conveniently located so that you can turn it ON and OFF as desired. Hope this helps

Ad

Question about Rockford Fosgate Car Audio & Video

2 Answers

...wire it up for maxuim bass??? Hi, since your amp is stable at 2 ohms per channel and your speakers are 4 ohms per coil, the easiest max-power hookup is each speaker on it's own channel with the voice ...

...one is OK. hook positive wire to one side and ground wire to the other side then use a jumper wire and hook it up from the other positive too the other ground this will put your speaker in 4ohm ...

Question about Legacy Audio Car Audio & Video

1 Answer

...it up online but i believe you hookup the negative of one sub to the amp and the positive of the other......with the other negative and positive on the subs run a jumper wire to connect the

Question about Jl Audio Car Audio & Video

1 Answer

...i hook up each amp to each speaker and recieve max power without blowing or burning any of it Run a Jumper from coil 1 + to coil 2 + and a jumper from coil 1 - to coil 2 - and then run + from coil 1 ...

Question about Car Audio & Video

1 Answer

...jumper wire if sub works with cd and other sources.Then check remote wire from behind radio or you can simply connect remote power wire to a another switched power source from fuse panel.Just make ...

Question about Jl Audio Car Audio & Video

1 Answer

...wire the D2 voice coils for 4ohms, you simply jumper the positive side of one coil to the negative side of the other coil (series). Connect the remaining terminals to the amp for a 4ohm load. If you ...

Question about Volfenhag Car Audio & Video

1 Answer

...If its a mono amp or you are bridging amp, hook up one channel like usual (+ and -) then use a jumper wire from the positive to the other positive on the speaker and do the same for the negative...

Question about Car Audio & Video

1 Answer

on the back of the jl w6 13.5 there are two jumpers to change the ohms from 8 to 2 on each speaker how in what config. do i put the jumpers in two get both speakers to two ohms. You cannot wire up (2)

Not finding what you are looking for?
Kicker DCVR122 -- 2 Ohm Dual 12in CompVR Vented Enclosure 05DCVR122 Car Speaker Logo

6 questions posted

Ask a Question

Usually answered in minutes!

Top Kicker Car Audio & Video Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a Kicker Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...