Kodak EASYSHARE G610 Thermal Printer "blue pictures" Questions

pictures! But lately, my blues are pink.I've tried calibrating the printer and the sheet that come out only has yellow and pink on it. With no blues or that little blue arrow in the corner. What's up.

blue tinted pictures all of my pictures are turning out with a blue tint! these are new cartidges, same thing hapened with the last set, I have been priting pictures for a year with no problms, they ...

...Blue looking pictures. Thank you pat change your usb cable as sometimes they can stretch and cause electrical noise causing CQ issue, also check if there is rendering in printer properties (ie, ...

...blue. Your pictures are coming out with a blue tint. Remove the color catridge and look at the bottom of it. the Yellow is probably green. If it isn't, trying performing a printhead cleaning through ...

...as suggested when my pictures were coming out red. now they are leaning to the blue side. They are better but not the wuality I am used to from my kodak You need a new printhead. They are

color I have a kodak 5300 and the photos come out mostly blue. I've try"d to calibrate and align but doesn't help printer clolour catridge USE RGB (red blue Green clours) to print a coloured picture ...

results, but I am having trouble getting consistency. Also I have copied some tax papers that had a blue copy stamped on it and the blue came out a lighter shade of blue. I am wondering if it might be

...then the black will be lost and the remaining pictures appear to have a high saturation of pinks, blues and reds but no black Hi, follow the step by step solution from kodak. Choose All-in-one ...

blue spots on the pictures. Any suggestions on what to do? the print head is at fault .The instruction manual will tell you the way to clean it .If all else fails remove the head flush with warm water

Prints come out blue. When I print it came out blue. So I deep clean the machine then I print out calibrate sheet. No yellow and only one black. I ran the calibrate program then I reprint calibrate ...