Question about Kodak EasyShare Office Equipment & Supplies
...cartridge needs replacing when Ive just put a new one in today!! I bought this printer thinking Kodak was a good brand, Im beginning to wonder!! mine to Yeah I tried all of the things imaginable but ...
...cartridge 10.00.01 Cyan print cartridge 10.00.02 Magenta print cartridge 10.00.03 Yellow print cartridge Supplies used in newer printer models contain a memory chip. The information contained on this ...
...10. 1000 supply memory error There is a chip on the toner cartridge that feeds info to the printer regarding the status of the cartridge. Either the chip is bad or the cartridge was replaced with the ...
...cartridge. This would cause the "10" errors. In some rare cases a surge in power can knock out a chip on the cartridge. Here's a photo of the chip on the black cartridge to help you locate it. If you ...
Question about Kodak EasyShare Office Equipment & Supplies
...chip ? this printer cartridge has an ID chip. If you want to refill toner cartridge, you will have to by toner and you can buy chip or if you have chip reseter, then reset the chip. It works fine. I ...
...cartridge chip in place, for about 10 seconds, until the LED light on the device turns green. This means the cartridge was successfully reset. Afterward, remove the device from the cartridge. 5.Place ...
...10 00 supply memory Hi Noman This error is displayed on HP printers only. And this appears if the smart chip on the toner cartridge is bad. Try to replaced it with a new one and this will not appear. ...
Question about Kodak EasyShare Office Equipment & Supplies
...cartridge and tells you an estimated ink level. My recomandation is to press the resume/cancel buton for at least 10 seconds, that being the method to cancel the ink counter. After you press the ...
10 cartridges, is a parrot and moron and who doesn't know what he's talking about and doesn't understand basic principles of computing. Yes, the chips are available, affordable ($3.50, the
cartridge and then monitor the toner supply (press and hold in the light exposure key for 5 to 10 seconds, the copy quantity display will change to "--"and the red lights on the panel will flash. then
65 questions posted
Usually answered in minutes!
1,024 Questions
996 Questions
812 Questions
74 Questions
69 Questions