...spin. What could be the root of the problem and possible solutions? It would appear that the head is damaged and blade(s) is jammed into the comb, preventing the blades from turning. You will need to ...
...heads are either damaged or are too clogged up to spin. First, try disassembling the blades and cleaning them out thoroughly. If this is not the problem, you may need to change the heads. Remington ...
...heads on Shaver spin around?? Most likely, one of the shaver heads is damaged and the cutter is embedded in the comb causing the whole thing to spin. It could also be that the retainer that holds the ...
Question about Philips Health & Beauty
...spin'. When turned on there is a clicking noise. The 3 rod like things which normally spins no longer spins. The head should be working as its removed. If you flip the head up and the shaver will run ...
...heads will spin very fast and the debris will fly off. The rinse and spray a lubricant on them. 3. You can replace all the heads at once by pulling the whole head straight up off of the razor. Then ...
i've replaced my philishave heads (HQ 167) because they were all Spinning. now two are ok but the third is still spinning. how do I rectify the problem? the problem is likely tobe the retiner. you ...
Are there any replacement heads out there? For some unknown reason (after 40 minutes of frantic poking with the tiny brush) the dual tweezer head has failed to continue spinning, though the wheel ...
My razor blade heads no longer rotate but when removed the mechanism underneath is spinning normally - the razor is clean and fully charged. It sounds like your heads are damaged and need replaced. ...
...heads and they will spin very fast and the debris will fly off. Then rinse and apply a lubricant. The Arcitec heads were not designed to be taken apart for cleaning like older models. This is a big ...
...spin. They need to be stationary so the hair can most effectively poke into the slots to be cut If yours are spinng, either they are not put in correctly of they are damaged and need to be replaced. ...
29 questions posted
Usually answered in minutes!
73 Questions
42 Questions
28 Questions
26 Questions