Kicker Solo-Baric L7 S12L7 Car Subwoofer "voice coils" Questions

voice coils in parallel to the amp. This means to connect both + terminals on the speaker to the + speaker output on the amp, then wire both - terminals on the speaker to the - speaker terminal on the

...voice coils of both speakers, you can only use one speaker, or both speakers, while only using one voice coil from each. there is no point of bridging them, you can achieve maximum performance by ...

...both voice coils, and your amp isn't stable at 2ohms, wire the voice coils in series and present an 8ohm load to the amp. It'll work fine, it just won't deliver quite as much power. Hope this

...Voice coils wired in parallel, speakers wired in parallel Recommended Amplifier: Stable at 1 ohm mono Option 2 (series/parallel) = 4 ohm load Voice coils wired in series, speakers wired in parallel ...

...of both voice coils. Then go from the negative of the amp to both negatives of both voice coils. Make sure your amp can handle a 2 ohm load. If you have two subs, you will need a 2 channel

...voice coils. It can be wired either as 2-ohm, 4-ohm, or as 8-ohm. 2-ohm = voice coils in parallel (both positives and both negatives connected to your speaker amp out wires). 4-ohm = use only 1 voice ...

...give you a 4 ohm load. google speaker impedance calculator. www.speakerimpedance.co.uk type in the wattage and all speaker loads per voice coil and will give you a selection up to 4 coils to hook ...

...voice coils, then run a jumper wire from the same voice coil's negative lead to the same speaker's 2nd voice coil's positive input. then run from the 2nd voice coil's negative back to the amplifier's ...

...voice coils will drop the amp to 1ohm if parallel and will kill it. The cleanest possible way to run this amp and keep it cool with lots of headroom is to run the coice coils in series then run the ...

...voice coils. So the only way you can get 2 of them to present a 2ω load is to use 1 voice coil on each one with the two of them wired in series. Using both voice coils, you can get a 1/4ω ...