...100 watts x 2 or 280 watts x 1 into 4 ohms and 140 watts x 2 into 2 ohms. ... Output Power at 14.4V (20Hz ∼ 20kHz): .High Current Mode: 2 x 50W @ 4 ohms (0.04% THD) 2 x 70W @ 2 ohms (0.1% ...
...100 Watts RMS x 2 channels at 4 Ohms ≤ 1% THD+N Signal-to-Noise Ratio:80 dBA (reference: 1 W output) Additional Power Output:200 Watts RMS x 2 channels at 2 Ohms ≤ 1% THD+N 400 ...
...though. Here are the specs: 4 x 100 @ 4 ohms (13.8V - <0.05% THD) 4 x 200 @ 2 ohms (13.8V - <0.10% THD) 2 x 400 @ 4 ohms bridged (13.8V - <0.10% THD) Fuse: External 60A Manufactured in 1999 - ...
...100 dB Fuse Rating: 150 amps ECLIPSE makes a 32440 If this is the amplifier you are looking for specs on... 4 x 85W @ 4 ohms (13.8V - 0.1% THD) 4 x 120W @ 2 ohms (13.8V - 0.1% THD) 2 x 240W @ 4 ohms ...
...THD) Rear 37W + 37W Front 20W + 20W Frequency Response (-3dB) Rear 2 Hz ~ 100 kHz Front 5 Hz ~ 50 kHz Try this site ...
100 Watts x 2 Amplifier continuous power / channel qty 50 Watts x 2 Amplifier input channel qty 2.0 Amplifier output channel qty 2.0 Amplifier high level inputs Yes Amplifier input signal voltage 0.2
...100 watts x 4 RMS at 0.1% THD; peak 2 ohm output is 200 watts x 4 Bridged output: At 4 ohms. the output is 200 watts x 2 RMS at 0.1% THD; peak bridged output is 400 watts x 2. The manual says bridged ...
THD+N) MRP-M1000 ....................................... 1000 W x 1 MRP-M500 ........................................... 500 W x 1 Total MAX Power MRP-M1000 ...........................................
...100 watts x 4 RMS at 0.1% THD; peak 2 ohm output is 200 watts x 4 Bridged output: At 4 ohms. the output is 200 watts x 2 RMS at 0.1% THD; peak bridged output is 400 watts x 2. The manual says bridged ...
...100 ) and THD (total harmonic distortion, the lower the better, like between .1% and .001%) If your amp is putting out 2000 watts at a high distortion level such as 1%, you wont be too happy with the ...
2 questions posted
Usually answered in minutes!
6 Questions
8 Questions
6 Questions
3 Questions
2 Questions
