...wont cut these are small animal clippers i had the blades sharpened i did this thinking they would cut like they did when i first got them they didnt cut any better at all. If possible try the blades ...
...clipper blade while u sharpening? Hi! I'm not sure about the nature of you question. Firstly if you mean, position the comb (with the adjusting lever on your clipper because your blades wont work, ...
...8800 noy cutting hair for cocker spaniel, clippers wont cut if the blade look black on the cutter blade and also the comb blade where the teeeth are U need to sharpen them Mannys Sharpening clipper ...
...clipper is moving your blades and your blade cannot be removed without depressing the latch. If your are experiencing tram lines with larger blades then it is more likely to be a clipper problem. ...
...clipper blade on the front of the clipper their is a lever color red grab this part with your 2 fingers and move it side to side if it moves and feel sloppy your gears and link are worn out. you need ...
...blade off of the clipper, there will be four (4) screws which secure the adjustable part of the lever to the clipper. You can tighten these screws and that will control how much resistance you get ...
...clipper blade are out of adjustment and also dull, The Lever from what you stated your Lever is worn out also. The only way I can help is to send your clipper and blades to us so we can make all the ...
...wont cut properly after i took the blade off to clean it. i oiled it several times but it isn't helping. i usually have to push down on the blade to get it to act right. You lost the plastic blade ...
...blade onto the clipper. Some models are fitted with a 'Latch' which should be pushed to release the blade if this is fitted and the release does not need to be pushed then a new latch needs to be ...
33 questions posted
Usually answered in minutes!
65 Questions
52 Questions
58 Questions
25 Questions
12 Questions
