...#775 Relay TRUNK RELEASE N/A SLIDING POWER DOOR N/A HORN WHITE/RED (-) @ STEERING COLUMN HARNESS TACH BLACK (-) @ DATA LINK CONNECTOR, BELOW FUSEBOX, PIN 9 WAIT TO START LIGHT N/A BRAKE
tach quit working an speedometer goes crazy what would cause vss has probably gone bad. vehicle speed sensor ( vss) a short or broken wire of the power, a grounding issue, or the cable that runs to ...
my 1981 corvette tach quite working how do I get working again? 1981 Corvette has an electical tachometer that is driven by impulses from the distributor. First, check for blown fuses, next make sure ...
1988 Ferrari 328 gts tachometer quit working. All the other ligts, etc. that are integrated into the tach. still work fine, fuses are good, wires and connectors on the back of the tach are clean. How ...
Motor dies when attaching tach wire to coil 1969 ford torino gt with a 351W, fully rebuilt. Followed schematics for coil wiring and tach connection. Start car, runs great, touch tach wire to coil wire
How to repair or trouble shoot. Engine off key on Tach reads 350rpm. Running at idle approx. 650rpm Tach shows 2400rpm. Above that the Tach reads only to fast. Wher should I be looking to solve this ...
ignition coil does the tach wire have to be hooked up from the coil to the distributer.there is a white wire hanging off my coil.the truck is missfiring and when i move the clip around it runs ...
have a 2001 camry 4 cyl...tach stopped working..is there a relay or does tach need to be replaced the tach runs off the ignition module so if the engine runs good the tach is bad no relay is involved ...
connecting aftermarket tach on 99 nissan quest stock tach inop replace stock tach with SunPro tach? That is up to you.
tach reads wrong tach acts like a 4 cylinder What kind of tach? Is it new? Does it have jumpers or dip switches? Some tachs have loops that need to be cut to adjust for 6 or 4 cylinder engines.
241 questions posted
Usually answered in minutes!
289 Questions
283 Questions
209 Questions
121 Questions
98 Questions