2000 Toyota Camry "change oil" Questions

change oil light come on? 2007 toyota camry 2.4L Typically, the oil change light comes on when the computer calculates you have 10% oil life left. If your oil level is ok, then you should have the oil

...Oil Change How much oil is needed for me to change the oil on my car? I am assuming that you will be changing the oil filter aswell if your engine is a 3L you will need 4.7 of Oil If your engine is a ...

...change the oil every 3,000 miles, this summer was an exception. I am using 5/30 oil (Mobile 1). Any reasons the light is still on? Help! Marsha Your check oil light correct? if oil level is full then ...

...oil and filter change. This evening, car wouldn't start. Noticed it was a little sluggish when I turned on in the afternoon, but then drove fine. make sure u still have oil, they may have left ur oil ...

...oil is to black i have already change its oil..thanks boyet.. engine overheating and engine oil is to black even i already change its oil. Is there any silver residue in the oil when changing

...I was driving my car suddenly the Oil light on my dashboard started to blink, what means that, I changed my oil 2 days ago, also I changed my gaskets and I also changed my cylinder head block. ...

changed oil pump on 2003 Toyota camry runs fine then loses oil pressure what is wrong with Oil pumps rarely go bad. 3 things cause oil pressure lose. Sludge from never changing the oil. oil sending ...

...level after these places change your oil.!!! Usually 4 Qts. or 5 with filter change. how about telling us what you drive and what motor is in it, that information can get you the information you

...oil change. Take it back to the oil change place. Or check the oil. If a seal is leaking or oil filter was not tightened or put on correctly oil may have leaked out and you will blow your engine! Is ...

...oil change light (check the owners manual) If its an oil change light it may be time to change the oil. If its an oil pressure light you could have a short to ground in the wiring or at the oil ...