2000 Toyota Avalon "4 intake manifold removal" Questions

Ad

Question about Toyota Avalon

1 Answer

...intake manifold if you worked on it and had it serviced. 2. Spark plugs loose. Yes!! I've seen this before and it comes the rear of the manifold..very confusing. 3. Check your valves and have them ...

Ad

...intake manifold. check crack sensor check the spark plug wires are properly placed for firing order if it is a 4 cyl it should be 1 3 4 2 I don't know the v6 order if that's not it then your 180 ...

Ad

...4 with #2 . Lastly, the car also stumbling and the check engine blinks rapidly apparently when taking off, turning, or swerving. Oh by the does the MAF suppose to spin free when giving it a turn with ...

...INTAKE MANIFOLD STEP 1 Remove the distributor and label the spark plug wires. STEP 2 Remove heater hoses and bypass hose. STEP 3 Remove upper radiator hose. STEP 4 Remove EGR valve? STEP 5 Remove ...

...intake manifold has internal EGR. REMOVAL (1) Disconnect the negative cable from the battery. (2) Drain the cooling system (refer to Group 7, Cooling System for the proper procedures). (3) Remove the ...

...4. Disconnect Secondary Runner Valve (SRV), Manifold Tuning Valve (MTV), Throttle Position Sensor (TPS), Idle Air Control (IAC) motor electrical connectors.5. Remove the electrical connector and the ...

Question about Toyota Avalon

1 Answer

...4. Remove the throttle cable and the bracket from the upper intake manifold. 5. Remove the cruise control cable, (if equipped). 6. Remove the fuel lines from the intake to the rear of the block. 7. ...

...4 bolts that hold the intake on. There will also be a wiring harness for the fuel injection. clamp? you will have to remove injectors/fuel rail assembly disconnect everything from intake and unbolt ...

...2001 infinite i30 1. Detach everything connected to the upper Intake manifold 2. Remove the upper Intake Manifold 3. Remove the fuel rail and injectors 4. Remove the IM 5. Replacement is the

Question about Toyota Avalon

2 Answers

into the intake ports of the heads that can cause hydro-locking. once the lower intake manifold is removed you will see the sensor right on top of the engine block about 3/4 the way back. good luck...

Not finding what you are looking for?
2000 Toyota Avalon Logo

725 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...