...change head light bulb toyota corolla 98. Difficult to reach bulb from engine compartment. Do I need to remove all head light assembly to change the bulb? no!!!! its difficult, but possible... the ...
...HEAD LIGHTS ARE TURNED ON AT NIGHT check the fuse in the fuse panel first your going to have to take most of the drivers side dash of to get to the gage cluster unscrew the cluster and unplug all of ...
change the plug wires, because if there is a bad wire you would definitely experiences sputter or a stutter, so do the plug wires and at the same time do the spark plugs, this should take care of your
...change the engines performance . I've changed the distributor cap, spark plugs , wires n rotor, the coil does work but I'm not sure on distributor itself. Spark plug #4 is black when changing ...
...change low beam head light bulb on the passanger side of toyota corolla 4 door sedan 2002 model you will have to go under the hood and get to the back side of the light assembly-there should be a cap ...
...change the license plate bulb on my 2004 corolla? I just replaced my 2 bulbs an hour ago in my garage. 1. Pry off all the clips that hold the liner. I used a cloth covered spatula, so as not to chip ...
...change the timing belt. If you do have an interference motor, you may have just broken some exhaust valves when the belt went - meaning an advanced repair is needed, possibly replacing the cylinder ...
...change it After looking for the answer to do the same I found two sites with the same 8 step instructions.Here is one of the two ...
...change a head light bulb open bonnet, goto the broken headlight. take off the connector from the back of the headlight, it has three wires going into it and is a cube type shape - the size of a ...
1,784 questions posted
Usually answered in minutes!
1,240 Questions
1,236 Questions
819 Questions
767 Questions
792 Questions