...2E engine with 12 valves. I recently top overhaul but the engine is not running in perfect condition. The engine rpm goes up and down (engine shaky). I set the rpm around 1200, if i set it lower than ...
...2e engine A newly overhauled toyota 2e engine has a very low engine oil pressure,the oil pump has been replaced with a new one,still the problem exist,what seems to be the problem? Hi, The only ...
Question about Toyota Corolla
...2e engine... at idling its not stable... i already did tune-up, replace spark plugs, change oil, replace hight tension wires... what else could be the problem why my engine stumble at idle??? any ...
...help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa. what is compression of 2E corolla engine 1993 ...
2e Hi there, I have a 1.3 toyota tazz, the SA version of a conquest. It tend to have a problem with the valves getting loose while driving high speeds. Is there aa way to fix this and how? what valves
...2E engine. The whole clutch assy. was replace and also the timing belt. When we test the car, its okay without aircon, but with the aircon on, we hear the humming sound during acceleration and the ...
...2e engine. when the engine is cool the engine is shaking and the sound of engine is like a chopper. when the temp rise up till 1/4 the engine will idle to normal shaking will stop and the engine will ...
2e engine. after an engine overhaul the power drops significantly. Takeoff is poor and acceleration only develops after some time. It wont also accelerate after 80Km/hr. timing position is perfect and
2e motor the check prosidure requires you engine be cold engine at top dead center at #1 cylinder and cams timing markes aligned to markes. check only intake and exaust lifters with lobes in the
1,039 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions