...rear of the car(and slightly up). Reassembly was just a matter of 1) gluing the cracked plastic back in place 2) aligning the white plastic pressure fitting into its receiver and 3) replacing the ...
...rear of the assembly. Repeat this for both the high beam and low beam. Slide assembly back into cavity. Repeat this for the other side. Test the bulbs light correctly Step 13: Gently push back the ...
rear bulb. If you are changing the bulb on the driver?s side, start the engine, turn the steering wheel all the way to the right, and turn off the engine. If you are changing the bulb on the passenger
...changing the wires. A dealer failed to solve the problem, charging $130 apparently to change a single wire. You can do this yourself in ten minutes; you can get very high quality wires for $40 (four ...
990 questions posted
Usually answered in minutes!
1,231 Questions
1,240 Questions
1,236 Questions
819 Questions
767 Questions