1995 Toyota Pickup "switch" Questions

...1500 4x4 headlights dont work.All other lights work. Headlight lamps are all good. Could it be the switch or the multifunction switch? High beam works when I pull on the directional le My tuck head ...

no power to brake light switch The brake light switch doesn't get power, it's a ground switch meaning that one side should have a good ground connection and the other would show ground once you engage

brake light fails to go off, when truck is off Eighter the brake light switch is sticking or its no good . The switch controls the rear brake lights thats all it dose. But its easy and eary ...

short in lighting switch turn signals work, park lights work but head lights do not work sometimes if you move the switch jsut right lights will come on 1986 nissan p/u Remove the switch and use shop ...

where is the clutch switch The clutch switch (AKA starter cutout switch) is located at the top of the arm that the clutch pedal is attached to. Use a paper clip and jumper the connector to the ...

how do you remove the ignition switch from a 1991 nissan pickup? Thanks Image Fig. 1 Ignition Switch Replacement 1. Remove the four upper and lower shell cover retaining screws, then the shell covers.

... Hi I'm litoshop your problem is not that hard to fix under the dash on your brake pedal you have a switch, that's your brake light switch it may need adjustment look under the dash some switch will ...

heating fan switch not working switch is stuck, will not move out of high cab heater? there are 3 fans, engine,cab heat and A/C. so.... a stuck CAB switch is a bad switch. easy huh? if the switch only

when I turn my ignition switch my stater turn the engine over the truck starts when i let go of the key the engine stops. each time I try starting it up I get the same results. Is it a bad switch. Yes

new bulbs and new fuse...still no brake lights...? It sounds like the brake light switch has failed. It is located on a bracket under the dash near the top of the brake pedal arm. You could put a ...