...cooling system Is a close system and when the coolant gets hot it actually expands creating pressure. Once it reaches a certain temperature the thermostat opens allowing hot coolant back into the ...
...only use antifreeze as its an anti corrosion agent as well change thermastat, flush cooling system, make sure cooling fans are coming on, check fuses. try bleeding the cooling system. hope this ...
cooling system toyota 92 4runner what about the cooling system
cooling system. Not sure about the 4 runner's cooling system, but if there is airlock I usually take the coolant back out, take the thermostat back out, fill the engine block from this hole with 50/50
hose to the housing. there should be three 10mm bolts should be holding the housing to the waterpump with the thermostat in between. If you are going to change it, then drain your cooling system first
...cooling system. Is the system losing water? The first thing to do is get a pressure test of the cooling system done. At the same time ask them to test the thermostat. If all ok, Have the engine and ...
...system to quit cooling. This can sometimes also start working again after shutting the system down and letting it sit for a period of time. This condition can be verified by looking at the pressure ...
...problem concerning suspension system caused the engine is not running and running cooling fans Light Bulb SUV How can I fix drawback I am stuck in the road now making no sense do not
...cooling system back up and after topping it up with the correct coolant you purge the cooling system of air. If you do not do this the vehicle will overheat and potential engine damage will result. ...
cooling system. I have found that if I splice a flushing tee, found at the auto parts store, into the upper heater hose, and fill the cooling system, it usually bleeds the air out of the system.Is the
977 questions posted
Usually answered in minutes!
427 Questions
430 Questions
361 Questions
348 Questions
361 Questions