1993 Toyota Camry V6 "2 camshaft alignment" Questions

Ad

...2 . Install timing belt on camshaft sprocket. If reusing timing belt, ensure reference mark on timing belt aligns with the reference mark on camshaft sprocket. Ensure tension exists on timing belt ...

Ad

...2 . Install timing belt on camshaft sprocket. If reusing timing belt, ensure reference mark on timing belt aligns with the reference mark on camshaft sprocket. Ensure tension exists on timing belt ...

Ad

...2 idler pulley and tighten the bolt to 29 ft. lbs. (39 Nm). Check that the pulley moves smoothly. Slide the left pulley, facing the flange side outward. Align the knock pin hole of the camshaft with ...

...2 idler pulley and tighten the bolt to 29 ft. lbs. (39 Nm). Check that the pulley moves smoothly. Slide the left pulley, facing the flange side outward. Align the knock pin hole of the camshaft with ...

Question about Toyota Camry

1 Answer

...Tap the crankshaft sprocket in with Special Tool 09309-37010-2.4L (2AZ-FE) engine Fig. Align the marked links of the timing chain with the camshaft sprockets during installation-2.4L (2AZ-FE) ...

Question about Toyota Camry

1 Answer

...camshaft gear tightened properly. (please don't ask) Actually drove about 2 miles. Started it next morning and spun that cam gear and broke the shear pin and the hole it goes into on the gear. ...

...camshaft, No. 2 idler, right camshaft and No. 1 idler.16Compress the tensioner until the pushrod's holes and housing align. Connect the dust boot to the tensioner then tauten the tensioner's ...

...2) RH Bank Camshaft Drive Gear Pulley (3) Water Pump Pulley (4) Idle Pulley (5) LH Bank Camshaft Drive Gear Pulley (6) Tension Pulley 014RY00043 Legend (7) Alignment Mark on Oil Pump. (8) Alignment ...

2.2L engine Make sure the INT diamond on the intake camshaft sprocket is aligned with the copper link at (1) at the 2 o'clock position. Refer to the illustration. Fig. Make sure the INT diamond on the

...2.Remove the bolt and install the top dead center timing peg 3 Rotate the crankshaft clockwise against the peg. NOTE: Installation of the alignment tool into the exhaust camshaft (6250) may require ...

Not finding what you are looking for?
1993 Toyota Camry V6 Logo

1,389 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1995 Toyota Camry
1995 Toyota Camry

1,828 Questions

1994 Toyota Camry
1994 Toyota Camry

1,753 Questions

1998 Toyota Camry
1998 Toyota Camry

1,565 Questions

2002 Toyota Camry
2002 Toyota Camry

1,303 Questions

1996 Toyota Camry
1996 Toyota Camry

1,134 Questions

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...