1990 Toyota Camry "aluminum siding brakes" Questions

...brakes on front of car. Probably best to do one side at a time, there is a frame underneath the passenger and drivers sides that you can jack up on, or you can jack up on the pinchweld located behind ...

...sequence to avoid warping and possible cracking. This is especially important when dealing with aluminum parts. The cylinder head bolts must be tightened and torqued in a specified sequence and ...

...brakes and still have less than 50,000 miles on the thing I think you have defective window regulators. I would start with the back window first. Remove the door panel by prkying up the cover which ...

...at the car it is driver side in the back of the engine compartment it will be a silver or black aluminum object with brake lines atached to the bottom of it, attached to the top of it is a ...

...remove the cover above the brake and gas pedal then look to the right and you shall see it. It's aluminum with 2 aluminum lines that lead from the heater core to the

GMC Sierra? If you look at the master cylinder under the hood on the drivers side,you should see an aluminum box near the brake reservoir,that is the controller that you need to deal with

...really haven't seen ball joints or links go out on those cars. if its a soft knocking sound its the aluminum tube hitting the air filter which is supposed to have a rubber foam stocking on it and it ...

...$550.00 what should I do??? They are not too bad if the bearing/hub assy is not frozen into the aluminum steering knuckle.They are held in with 3 13mm bolts from the back side.Remove the front ...

...on the passenger side near the firewall. It's attached the ABS Module. It will look like a block of aluminum with 4 metal brake lines attached. You can see it clearly by lifting the hood, leaning in ...

...abs module. Its located over on the driver's side of the engine compartment on top of the big aluminum block with all the brake lines running into it. Check fig:---This is the module.