1992 Toyota Corolla "ford probe vacuum leak" Questions

...Ford Probe. It was a head gasket leaking coolant in the cylinder during idle but higher rpm driving would prevent the coolant from entering the cylinder due to the higher internal cylinder pressure. ...

...ford probe. It runs good four cylinder. Drives run till stopping. Idle goes down and very low idle What could it be Most likely a vacuum leak. Check the main vacuum line on the power brake first...by ...

Ford F-150 w/ 300"six cylinder and 4sp. It stops when I apply the brakes fully. check the hose and the rubber around the vacuum booster the best way i found a leak was to take a 3ft peace of fuel

...ford excursion Limited? It is the 7/3 diesel engine. I need to find it so my husband can replace it. It has a leak. the main vacuum hose is at the main intake frame at the top of the engin but the ...

...ford probe auto wont idle down when you stop at lights idles at 1500rpm takes about30 seconds to get to 500rpm ? all I want to know is how to get it to idle slower at lights Could have vacuum leak , ...

...ford probe gt 24 valve it cranks over but won't start First check for spark at the spark plugs. If you are getting spark, then check for fuel pressure at the fuel rail (shrader valve). If you have ...

...Ford Probe GT to idle rough and misfire at idle only Buck Run better when it's cooler outside and it also stalls when it has a rough idle Check for any sources of unmetered air entering the engine. ( ...

ford probe as when engine is started it races with no control when the engine is staarted the engine revs up with no control This sounds like a major vaccum leak or a stuck IAC(idle air control) motor

...makes air spray sounnd when driving. noise stop when you put on brakes Sounds like a vacuum leak to me, use a 3/8 hose, put one end to youer ear and probe around the hoses, not the coolant

...ford focus DOHC when you stop it stalls.at red lights I think this is all due to your vacuum leak. Look for a hose not connected to the throttle body or the intake manifold. Use a piece of hose to ...