1987 Peugeot Liberte "warped pressure plate" Questions

Ad

...pressure and clutch plates were replaced including the bearing. Clutch is making a rattling noise but not when pedal is down. Having difficulty getting into 1st and 2nd gears. Mechanic can't figure ...

Ad

...bearing - broken clutch plate spring (not common) - warped pressure plate (rare) - warped driven plate (caused by poor installation) For all these except the engine mounts the gearbox has to come ...

Ad

Question about Cars & Trucks

1 Answer

...you could have a bad slave cylinder, a bad master cylinder, the springs that create the pressure between the clutch and pressure plate might be failing or an overheated/warped clutch pressure

...so the pressure plate goes down EVENLY. (YES, it's a pain in the keister!) If NOT, you'll have a warped pressure plate, and it will be junk! Thanks for letting me say that, I feel

...pressure plate for 2.6-l Isuzu 1991 pickup 4x4 Flywheel: The torque specification for the flywheel bolts is typically around 80-85 lb-ft (108-115 Nm). It's crucial to tighten the bolts evenly in a ...

Question about Peugeot Liberte

2 Answers

plate or pressure plate. the only problem is that you have to the whole clutch apart to do either. I would recommended you change the clutch with a pressure plate and possibly re-surface the fly wheel

Question about Peugeot Liberte

1 Answer

pressure plate bolts install Not sure what the question is, but pressure plate bolts should be installed after you put the clutch alignment tool into the clutch disk, then tighten them a little bit at

Question about Peugeot Liberte

1 Answer

...into any gears If this is a stick shift, try shutting the car off. If it goes into gear then your clutch pressure plate is warped. If its a automatic the shift interlock is not working as it

Question about Cars & Trucks

1 Answer

...pressure plate by evenly undoing the pressure plate cover bolts. lift away along with the clutch plate Remember the way the clutch plate is facing as it will only go in one way. If the flywheel is ...

...warped pressure plate, oil on the flywheel face /pressure plate face, faulty engine mounts. many people think that it is just a matter of replacing the clutch plate but this always results in a poor ...

Not finding what you are looking for?
Cars & Trucks Logo

194 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

1991 Peugeot 405
1991 Peugeot 405

451 Questions

1990 Peugeot 405
1990 Peugeot 405

103 Questions

1999 Peugeot 406
1999 Peugeot 406

80 Questions

1999 Peugeot 206
1999 Peugeot 206

56 Questions

Top Peugeot Experts

xxxxxx xxx

Level 3 Expert

5117 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...