...camshaft sprocket bolt 66-67 ft lbs.crankshaft pulley bolt 108-116 ft lbs.cylinder head bolts 65-72 ft lbs. ( 3.0L) 76-83 ft lbs. (3.5L)drive plate ( flywheel ) 53-55 ft lbs.exhust manifold 11-16 ft ...
...camshaft sprocket bolt 66-67 ft lbs. crankshaft pulley bolt 108-116 ft lbs. cylinder head bolts 65-72 ft lbs. ( 3.0L) 76-83 ft lbs. (3.5L) drive plate ( flywheel ) 53-55 ft lbs. exhust manifold 11-16 ...
...sprocket and oil pump chain. 17. Install righthand camshaft phaser lock tool No. 10202, or equivalent. Minor rotation may be required to install camshaft phaser lock. 18. Loosen both intake oil ...
Question about Mitsubishi Montero Sport
...camshaft sprocket timing dowel pin holes line up with timing chain housing holes, Fig. 1. 6. Remove timing chain guides. 7. Raise and support vehicle with jack stands. 8. Ensure timing chain slack is ...
...camshaft sprocket should be aligned with the mark on the inner timing belt cover or the edge of the cylinder head. With the distributor cap removed, the rotor should be pointing toward the No. 1 mark ...
Question about Mitsubishi Montero Sport
...camshaft sprocket and secondary timing chain Secondary timing chain tensioner Secondary timing chain guide INSTALL BANK A or B Install or connect the following: Timing chain tensioners, prepare them ...
...camshaft sprocket bolt, using a 7 / 8 in. (21mm) wrench to hold the camshaft. Then remove the timing chain and camshaft sprocket. Remove the crankshaft sprocket, if necessary. To install: Inspect the ...
Question about Mitsubishi Cars & Trucks
...camshaft sprocket bolt 58-72 ft. lbs. crankshaft pulley bolts 108-132 ft. lbs. crankshaft pulley center bolt 80-94 ft. lbs. cylinder head bolts cold engine 65-72 ft. lbs. warm engine 73-80 ft. lbs. ...
...camshaft sprocket should be aligned with the mark on the inner timing belt cover or the edge of the cylinder head. With the distributor cap removed, the rotor should be pointing toward the No. 1 mark ...
camshaft sprocket bolt58-72 ft. lbs. crankshaft pulley bolts108-132 ft. lbs. crankshaft pulley center bolt80-94 ft. lbs. cylinder head boltscold engine65-72 ft. lbs. warm engine73-80 ft. lbs. cylinder
81 questions posted
Usually answered in minutes!
593 Questions
427 Questions
263 Questions
124 Questions
6 Questions