1996 Mitsubishi Montero Sport "camshaft sprocket bolt" Questions

...camshaft sprocket bolt 66-67 ft lbs.crankshaft pulley bolt 108-116 ft lbs.cylinder head bolts 65-72 ft lbs. ( 3.0L) 76-83 ft lbs. (3.5L)drive plate ( flywheel ) 53-55 ft lbs.exhust manifold 11-16 ft ...

...camshaft sprocket. Maintain tension on the belt between the sprockets. Continue installing the belt onto the water pump, the right bank cam sprocket and the tensioner. With your fingers, apply gentle ...

...camshaft sprocket alignment copper link to the "INT" diamond timing mark on the camshaft sprocket NOTE: When lowering the timing chain rotate the assembly 90° to allow the chain to fall between ...

camshaft sprocket holding tool. Loosen and remove the camshaft sprocket retaining bolt. Remove the sprocket from the camshaft. Repeat the procedure for the 2nd camshaft sprocket. Remove the crankshaft

...camshaft sprocket timing mark should align with the generator bracket timing mark and the front camshaft sprocket timing mark should align with the inner timing belt cover timing mark. If the belt is ...

...camshaft sprocket locator hole are aligned to the marks on the engine block or timing chain dampener. This is the No. 1 piston at TDC (No. 4 firing position). Unfasten the camshaft sprocket retaining ...

...camshaft sprocket bolt Fig. 4: Remove the camshaft sprocket and the timing chain at the same time . . . Fig. 5: . . . then remove the tensioner assembly Fig. 6: Compress the tensioner spring and ...

camshaft sprocket with the notch on the timing belt cover. When the single timing mark on the right exhaust camshaft sprocket is aligned with the notch on the timing belt cover, ensure that the double

camshaft sprocket bolts. Remove the camshaft sprocket. Remove the camshaft timing chain. NOTE: Do not turn the crankshaft assembly after the timing chain has been removed in order to prevent damage to

...camshaft sprocket bolts. 4. Remove camshaft sprocket. 5. Remove timing chain. 6. Remove the crankshaft sprocket. 7. Remove crankshaft sprocket key. INSTALLATION 1. Install the key into the crankshaft ...