tye rod's the alow you to turn your wheel's .! from left to right.!!! hope this help's you. good luck" Go to supercheap or repco and buy a ball joint breaking fork. smack the old ones out. put the new
...can be either tye rod bushing inner or outer tye rod ends. Could also be the rack and pinion. If the truck was wobbling really bad it could have shook something loose to cause the truck not to
...tye rod, but i just had the tye rod and ball joint replaced on that side less than a year ago... I am a single mother and I need a dependable vehicle.. Plz someone help me find out what is going on ...
rod ends and definately not the shocks for knocking sounds.. It sounds more like bad ball joints poping, although the idler arm and tye rod ends could be worn also . upper ball joints, or tie rod ends
tye-rods on 2000 cirrus There are two tie rod ends on each side, an inner and an outer. Each one requires a special tool to remove. When the new parts are installed, the vehicle must be aligned, which
rear tye rods on a mkt 2012 lincoln with 36.000 miles And the question is? If they are worn get new ones at Rock Auto (Moog Brand) install yourself & then have it Aligned Easy Job
Question about Dodge Cars & Trucks
1995 dodge spirit 6cyl 3.0 tork settings for inner/outer tye rods log in here all techs do. wise https://eautorepair.net/Marketing/Default.asp and read. it all there.
...makes a knocking noise when I turn it back and forth when it is stationary. Can you tell me what it could be please? Yep Tye rod ends need replacing they are wore out that is the sound they will
Question about Toyota Cars & Trucks
...it moves to one side or the other. You should take to a shop and have ft end shaken down for loose tye rods/ ball joints if all ok check ...
...off remove the nut from the upper control arm drop it down using a tye rod remover take nut off cv joint then use a pry bar to pop the cv joint from transmission now pull out of axle and
132 questions posted
Usually answered in minutes!