1990 Daihatsu Rocky "timing marks" Questions

Ad

Question about Daihatsu Rocky

1 Answer

timing marks for a feroza 91 model YOU NEED A CHILTON OR HAYNES REPAIR MANUAL TO LOOK AT PHOTOS FOR TIMING MARKS LOCATION ON CAMSHAFT SPROCKETS AND CRANKSHAFT SPROCKET.

Ad

Question about Daihatsu Rocky

2 Answers

...timing marks for diahatsu rocky 1985 4x4 3y motor The 3Y is a Toyota engine used in the Rocky/Rugger. Setting up valve timing you need to set the no.1 cylinder on TDC on the compression stroke. Turn ...

Ad

Question about Daihatsu Rocky

2 Answers

...timing_belt_diagram_marks.htm Hi, Yes I have sorted thankyou. The steps I took are as follows: 1 - set No1 pistojn to TDC and found a cast pointer on the front of engine lined up with indent in ...

...timing marks - crankshaft should be on the 0 mark. Camshaft timing marks--intake camshaft mark set at 3 o'clock and exhaust camshaft mark set a 9 o'clock. These timing marks are critical for motor to ...

timing marks on hyundai elantra 2009 4 cyl. valve timing, crank pulley T D C mark to mark on timing cover. Cam gear mark to mark on head or block . Ignition timing T D C mark on crank pulley to timing

...timing marks on the camshaft timing gears are in general alignment with the timing marks of the camshaft bearing cap: TIMING MARK IDENTIFICATION CYLINDER BANK INTAKE GEAR MARK EXHAUST GEAR MARK RH ...

Question about Daihatsu Rocky

1 Answer

...timing marks. Install right and left timing chain guides. Tighten bolts to 89 in-lbs (10 Nm). Rotate the left camshaft until the timing mark is at the 12 o'clock position. Rotate the right camshaft ...

Question about Daihatsu Rocky

1 Answer

Timing marks setting Hyundai Lantra can anyone tell me how to set the timing marks for a 1996 Hyundai LANTRA (not elantra) 1.8L.. Specifically the cam timing marks where do they set at? Or post a link

...timing marks, 1997 ford escort where are they? Ford Escort/Tracer 1991-1999 Repair Guide REMOVAL & INSTALLATION 1.8L Engine (see Figures 1, 2, 3 and 4) Disconnect the negative battery cable. ...

Question about Daihatsu Rocky

1 Answer

...timing marks are just above the cams at the "twelve o'clock position" If necessary, align the timing marks. NOTE When aligning the cam pulleys with the seal plate marks, align the left cam pulley ?I? ...

Not finding what you are looking for?
1990 Daihatsu Rocky Logo

132 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Daihatsu Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6523 Answers

Are you a Daihatsu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...