2001 Daewoo Leganza "25nm" Questions

what is the torque settings for the cylinder head bolts for a daewoo laganza Hi your Leganza head is tightened down in 4 stages, stage 1 25nm St 2 +90deg, St3 + 90deg, St4 + 90deg.

cilinderhead torque specification deawoo tacuma 2002 25nm +70 degrees +70 degrees you are supossed to change the bolts too

what is the cylinder head tightening torque for a renault megane 1.5 dci (2004) Stage 1: 25nm Stage2: 25nm Stage 3: 90 deg Stage 4: 90 deg Stage 5: 90 deg +-10 deg Yes, that is correct- a total of 270

What is the torque settings on a 2006 clio 2 1.5dci con rod bolts? Con rods 25Nm 110+-6° Main bearing 25Nm 47+-6°

...5 dci (2004)? I assume you are looking for cylinder head tightening torque specifications? Stage 1: 25nm Stage 2: 25nm Stage 3: 90 deg Stage 4: 90 deg Stage 5: 90 deg +- 10deg Yes that is correct- a ...

...for chev utility 1.4 2012 thanks if your engine code(suffix) is z14xep head bolts-renew bolts 25nm 60 deg 60 deg 60 deg main bearings-bolt sizeM6-10nm 60 deg 15 deg M8-25nm 60 deg 15 deg big ...

...1.6 ltr was only for some markets the engine i think it may be is! cyl head head with new bolts, 25nm +90 +90 +90 + 45 degrees the big end/conrod bearings 25nm +30 degrees thats if it a ...

...ft lbs) Exhaust manifold Bolts: 7Nm (5.2 ft lbs) Oil Pan Bolts: 7Nm (5.2 ft lbs) Oil Drain Plug: 25Nm (18.4 ft lbs) Timing Chain Tensioner Bolts: 7Nm (5.2 ft lbs) Camshaft Sprocket Bolts: 25Nm ...

...+ 45 degrees Corsa 1.4i Engine code Z14XE 2000-2004 Bolts must be replaced after removal. stage 1. 25Nm stage 2, +90 degrees stage 3. +90 degrees stage 4. +90 degrees stage 5. +45 degrees Engine

...head and need to no tension of head bolts these specs straight from service info single cam 25Nm + 70deg+ 70deg+ 30deg twin cam 25Nm+70deg+70deg+ 30deg alot of after market gasket sets are