2002 Hyundai Santa Fe "remove front fog light" Questions

Ad

Question about Hyundai Santa Fe

2 Answers

...replaced it with the new bulb. The job took less then 15 minutes You need to remove the main Headlamp housings, to get at the front fog lamps.(which is very easy, just 2 or 3 securing bolts)

Ad

... that many santa fe's require the removal of the entire front bumper fascia just to get to the bulbs in which case you'd have to remove your headlights to get to the screws holding the bumper fascia ...

Ad

...front of the wheel that usually goes around the wheel well. There are plastic thumb pins on the outer edges of this plastic covering. Remove the thumb pins and this plastic piece will come off. 3. ...

...remove the screws holding the front of the under engine plastic cover/shield and drop down sufficient to gain view/access? to the rear of fog lamp then if a cover is on? try turning anti clock to ...

Question about Hyundai Santa Fe

1 Answer

...front grill then you have to remove undercover underneath the car there will be for 10 millimeter bolts holding it in place there will also be two 10 millimeter bolts one in each side of the front ...

remove the front facia (bumper to get access to the fog lamp assemblies as they are bolted in from behind. No big deal. There are a few screws along the top of the facia under the hood along with some

...Remove the front fog light assembly.Remove the back cover. Remove the spring retainer, and then detach the fog light bulb.INSTALLATIONInstall in the reverse order of removal. I dont get the question? ...

...Remove the front bumper fascia deflector. Disconnect the electrical connector from the front fog lamp bulb/socket. CAUTION: Refer to Halogen Bulb Caution in Service Precautions. Rotate the front fog ...

Question about Hyundai Santa Fe

1 Answer

...Front Fog Light Assembly REMOVAL Disconnect the ground cable from battery. Remove the two clips and lower mudguard on side that bulb is being changed. Disconnect the harness connector from bulb on ...

remove the front bumper cover so you can remove the vacuum box that is in the the way of the fog light bolt. To do so you need to remove the Torx (star) screws located in the front wheel wells as well

Not finding what you are looking for?
2002 Hyundai Santa Fe Logo

1,612 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...