2002 Daewoo Lanos "belt interference timing" Questions

...interference situation with the Daewoo and timing belt. Which applies to the above car. Need to know so I do not make unnecessary repair to the vehicle if I don't have to. Well, broken timing belt ...

an "interference" engine and the belt broke while running you may have major engine damage. If non-interference, buy shop manual to give all details and torque values for this very important procedure

...belt broke. The engine is a 1.6. Does anyone know if this is a free running or interference type engine? I saw a few sites and forums that state that this engine, 1.6 is a interference type engine. ...

timing belt intervals hi, 2004 daewoo lacetti 1.6sx, is my engine non interferance & how often to change timing belt. Every 2-3yrs. But depends on usage. Good that you care. Rate this fixya.

...belt. I have replaced all belts had nicks lined up but running and driving like on 2 cylinders. does this mean bent-broken valves or timing is still out. Thank you Rubbereyon The Lanos engine are an ...

...belt if your finding pieces inside the cover area! But these are an interference engine so I hope it didn't do internal damage! if it did jump a tooth, I would chech the cog side of the belt and see ...

...interference fit Engines. Which means that if the timing belt rips while the engine is running the pistons will hit and bend the valves and you will have to get new valves and possibly a new cylinder ...

Is the 1.6 liter a zero tolerance engine? If you mean "Interference" engine, then yes it is. That means that if a valve is open and the timing belt breaks, a piston will hit it.

...belt breaks does it make any damage on the wallves on Daewoo lanos? Yes-- it will most definitely cause damage to the valves. The motor is an interference unit which means that the pistons will hit ...

...belt fails. John Hello jjenkins_jcf: My name is Roger and I can help with your problem.The answer to whether or not your engine is a interference engine is yes it is. This means if the camshaft stops ...