2000 Hyundai Accent "coupe wipers working" Questions

...coupe. The rear wiper wasn't working on my '05 Accent and it turned out that the nut was just loose on the wiper arm. One thing to note is that the "stop" position is up, not down (not horizontal to ...

...Coupe knocking from Dash when Wipers turned on I have a 2000 Renault Megane Coupe Sport 16V, I have justbrought the car and just noticed this fault after using the wipers for the first time. Once the ...

coupe 98 electrical problem Can any1 help first my heater blowers would only work on full then my windscreen wipers stopped working but my heater control now works my wipers help!!! see if you got any

...WORKING??IS THIS A FUSE OR DO I NEED A NEW WIPER ARM? FIAT COUPE 2000 2.0V On anything electrical on a car, when it stops working, ALWAYS check the fuse first. Could save you a lot of trouble. Always ...

coupe are not working, the wipers go but no fluid comes out. Any ideas It sounds as if there is a blockage either in the base of the screenwash reservoir or the feed pipe from the reservoir. You could

coupe o2 im having problems with the wipers they keep freezing Hi Increase the strength, and the amount of your windscreen washer fluid, this can help ! Good Luck ! A FixYa rating would be appreciated

wipers dont work and i bought a new switch cause i broke the original. the problem is that the switch i bought is for the hatchback which has a rear wiper control. my celica does not have a rear wiper

coupe that the wipers start working when i turn the key to acc position and the wipers swicht off i cant find relays on this car wipers should normally work in the run position of the ignition switch.

...wipers stopped working I was driving in the rain last week, and my windshield wipers stopped midway through the cycle and quit working. I got the wipers to lay down like they usually do and I noticed ...

I have a 1999 Alero coupe. My problem is that my wiper will not work in the washer feature. The pump nor the wiper come on, but the wiper will work on normal setting. Can anyone help. Sounds like you ...