Question about Land Rover Range Rover
...remove the rear suspension arm and bushing . If upper arm rear bushing is to be replaced, use Suspension Bushing Service Set T79P-5638-A and Rear Axle Control Arm Bushing Tools T86P-5638-AH and the ...
...Remove rear wheel assembly. Remove rear wheel speed sensor from carrier. Dismount brake caliper and support with mechanic's wire. Remove brake disc. Remove 4 axle hub mounting bolts. Special tool ...
tools for this. You will need to remove both rear brake assemblys (rotors, calipers). Than look on the other side of the backing plate, there you will see 4 big nuts that hold the backing plate on the
Question about Land Rover Range Rover
remove axle bearing. Im guessing step 10 is an issue, working with no slide hammer are you, a key tool in any shop.? there is a great Utube vid, with a DIY (hillbilly) with a brick tied to a rope, and
Question about Land Rover Range Rover
...remove the bushings from the carrier with tools 09453-33000b and 09545-21100.to install -press in the bushings to the carrier with tools 09453-33000b and 09545-21100- press in the bearings to the hub ...
Question about Land Rover Range Rover
...remove and replace rear axle seal for 1993 cheep cherokee Jack up vehicle and support on stands. Remove wheels. Remove differential cover . Locate and remove lock pin that holds cross shaft in. Slide ...
...tools such as a bearing puller? rapeck: The Maxima rear axle bearings are manufactured as a hub assembly. There is a ring for the ABS which is fitted to the hub which must be removed and installed on ...
block rear wheels .then remove wheel disconnect wheel speed sensor .remove brake caliper and bracket then rotor .half shaft bolt.you need a tool remove front hub and bearings as a unit.from axle shaft
...remove rear hub on a f 350 . i have outer bearing out but can not remove hub In the center of the hub is the axle retaining bolts, 8 I think, remove them and pull the axle out, under that is a giant ...
...tools..remove wheel, remove axle nut, remove brake caliper, remove lower control arm bolts,remove the bolt for upper control arm, remove the outer tie rod bolt, support vehicle and suspension, the ...
247 questions posted
Usually answered in minutes!
340 Questions
202 Questions
166 Questions
146 Questions
112 Questions