...remove plastic covers around column.once you can see ignition casing look for small hole around barrel casing.insert 3mm wire or small allen key into this hole and press down while turning key to on ...
...key. look at the rear of cylinder lock and see if switch is removed.The other problem may be the cylinder lock may be broken, remove the cylinder lock and see if the arm that turns the switch is ...
...key. look at the rear of cylinder lock and see if switch is removed.The other problem may be the cylinder lock may be broken, remove the cylinder lock and see if the arm that turns the switch is ...
Question about Land Rover Range Rover
...remove the battery holder on the key remote. Turn the cover until the arrows line up and remove it. The cover fits very tightly and you may need a small screwdriver to pry it off. Remove the battery ...
...key on ignition to number 2 then off and remove the old battery with in 30second. if not you need to have the ecu read as you have wiped the code of the immobilizer/alarm side and it will need to be ...
Question about Land Rover Range Rover
key removed. Repeat for unlock button. 2. Disconnect negative/earth cable from battery. While disconnected open driver's door, turn ignition to position 2, return to battery leaving driver's door open
Question about Land Rover Range Rover
...remove the ignition key noises are heard around the steering column but the wheel doesn't move. Also the adjustment switch doesn't do anything when I move it in/out or up/down. What am I doing wrong? ...
...key in the doorlock and turn it and press the open and then open all windows and the moonroof. I can revers that procedure and close all windows and the moonroof. The ignition will not turn. Open or ...
...noise but the key will only insert about 1/4". Any suggestions you may broke a piece of fine or rail off in the hole. look in the hole for obstruction , if there is , use a paper clip to remove ...
...key in the ignition. Also, be sure that you are in Park or Neutral. remove the negative wire from the battery and leave it for a few seconds, then plug the negative wire back to the battery and wola! ...
247 questions posted
Usually answered in minutes!
340 Questions
202 Questions
166 Questions
146 Questions
112 Questions
