...Control Module located in the engine compartment. There's also a 'clock spring' in the circuit between the steering wheel & the cruise module. Note: there are two sets of contacts in ...
...P1529 is simply an indicator that the transmission control module (TCM) requested the engine control module (ECM) to turn on the check engine lamp. Let me know if this helps or if you need mor
...Engine Control Module). In the 98 Elantra, there are two separate computer modules; one for the engine, the other for the transmission. (both located under the dash Driver's side. The diagnostic ...
...Erratic resistance changes sending BAD signals to the Engine Control Module and Transmission Control Module ECU & TCM. A good technician knows how to check it with an analog ohm
...Engine Control Module. This device is located under the instrument panel and is the control center of the vehicle. It controls the following: Fuel metering system Transaxle shifting Cruise control ...
...cable. Evacuate, charge and leak test the air conditioning system refrigerant. Operate the engine to normal operating temperatures; then, check the climate control operation and check for
...Engine Control Module (ECM) checks ECT sensor voltage and uses the information to adjust fuel injector pulse width and ignition timing. When the temperature sensed is very cold, the ECM enriches the ...
...Control Module). A crankshaft position sensor can also cause a no start condition. It is located near the Crankshaft of the engine. --- Here's more information about the crankshaft position sensor ...
Engine Control Module) decides to check the fuel system for any leakage - IT closes the valve and then applies a vacuum to the system and monitors it for leakage. This valve (CCV), if sticking CLOSED,
783 questions posted
Usually answered in minutes!
1,180 Questions
1,029 Questions
656 Questions
493 Questions
443 Questions