switch or wiring connection . You can leave in nuetral turn ignition off might not go to lock but hook battery up should be able to shift until you put back in park until you get switch replaced. Just
ignition switch was locked. They replaced the ignition switch and then 2 weeks later same thing happened again. They replaced the ignition switch a second time and so far it's worked fine. Now if only
...ignition switch in 2008 Chevy HHR Key won't turn ignition switch in 2008 Chevy HHR. Tried jiggling key, turning steering wheel, jiggling trans shirter. Any ideas on how to get this running so I can ...
Question about Land Rover Discovery
...chevy uplander hard to start http://www.topix.com/forum/autos/chevrolet-uplander/TALVQR3Q8MKI7M33D/2005-chevy-uplander-hard-to-start Ignition switch is likely bad
...is stuck in the start and I cant turn it back in the off position You need a new ignition switch lock cylinder. GM is extremely bad for these things going bad. There not all that expensive to
...replacing. If you take to Chevy dealership The cost is upwards of $600.00 The parts cost $18.26 for 3 wires, medal things to attach 2 wires - yellow wire broken - gear shifter won't come out of park ...
...ignition switch You Should Replace it ... The last clue is the dead battery The interlock with the the transmission need the ignition switch to work correctly You could try a little silicone/graphite ...
Question about Cars & Trucks
...relay and or ignition relays and try replacing them or stealing an identical one from another place and see if the car starts. Starter relays are usually mixed in with the fuse box under the
ignition switch and housing(had mine replaced 3 times already. firstr time at 12,000 miles) what you can try is hit key with rubber mallet while trying to turn but this would only be to get it started
462 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: