ford expedition problems I have a Expedition 2000 i have the LED Brake Lights it have the Reverse wire but when i plug it in the 4 pin socket they come on and they stay on. the led has much lower ...
...led on my DOD Grunge Metal pedal model: FX69 doesn't work. I've tried replacing it but i don't know what voltage it is does anyone know or know how to find out? I have medium ...
Question about Cars & Trucks
...led after fitting a new master cylinder . start at the longest line and work back to the shortest. Have a mate help by pumping the pedal a few times and holding down while you open the bleed nipple . ...
...max drive it for a day or to then in the evning when its starting to get dark take a bright white LED flashlight and inspect all A/C parts if you have a leak the die will luminate allmost glow. Try ...
...led me to believe I nee to remove the small rubber hose leading from the raiator to the engine. I have disconnected the two bolts and tube and it definitely is not the right place. Now.. do I follow ...
Question about Land Rover Discovery
...bleed the system.We had it bled and was working good,until abt 3 hours later,it wouldn't start.The next day we led it several times.The car heated up and the hose was hot then it cooled ...
...bleed hoses are not obstructed. if no problem is found in thes areas a cloged oil cooler is likley due to rust debris cloging the tubes thru the cooler removal and visual inspection is easil done. ...
...led you to believe your starter is bad. Also, if you have any questions about the procedure below, please let me know. Thanks for using FixYa. Removal & Installation Disconnect the Negative ...
...led to believe that it needs further bleeding. Any help on this problem would be gratefully recieved. best regards kenny with the engine running open plug on thermostat to bleed system, on the same ...
462 questions posted
Usually answered in minutes!
325 Questions
233 Questions
215 Questions
235 Questions
219 Questions