Hyundai Motor 2002 Elantra "locating purge control valve" Questions

Ad

Question about Hyundai Elantra

2 Answers

...purge control valve isn;t operating properly. The fuel tank pressure sensor can send faulty info causing code to set but most of the time it is just the purge valve that needs replaced 2000 hyundai ...

Ad

Question about Hyundai Elantra

1 Answer

...purge solenoid valve is a duty control type, which controls the flow of purge air from the evaporative emission canister. Inspection 1.Look for loose connections, sharp bends or damage to the fuel ...

Ad

...Control System Purge Flow Fault). What do I check? There is an evap purge valve located in the back of the driver side of the engine. This valve needs to be replaced. Had the same code a couple weeks ...

...purge control valve opens allowing intake vacuum to siphon the fuel vapors into the engine.EVAP emission canister purge is contolled by a valve which allows engine vacuum to pull stored fuel vapors ...

...control purge valve on your truck. The canister purge valve is on the evap. canister itself(at the rear of veh. near the fuel tank. The volume control purge valve is located in the eng. compartment, ...

...purge control valve and a canister volume control valve, so make sure you are dealing with the right valve.The volume control valve should be on or near the intake manifold, and the purge control ...

...Pressure Control Valve (Purge Valve)...(1)Throttle Body (2)EVAP Solenoid Valve (3)EVAP Vacuum Switch (4)EVAP Canister (5)EVAP Pressure Control Valve (6)Floating Roll-Over Valve (7)Fuel ...

Question about Hyundai Elantra

1 Answer

...Fault Location: Evaporative Emission (EVAP) System, Vent Control - Circuit Malfunction Possible Cause: Wiring harness. Evaporative emission (EVAP) canister purge valve. Engine control module

control module (PCM). The canister purge valve is closed each time the power train computer runs the OBD-II (Onboard Diagnostic Generation II) EVAP monitoring self-test.-------------------------------

Question about Hyundai Elantra

2 Answers

Purge Control Solenoid Or Purge Control Valve Fault. A fuel tank pressure change greater than minus (-) 7 inches of water in 30 seconds occurred with a purge (fuel vapor) flow at less than 0.02 pounds

Not finding what you are looking for?
Hyundai Motor 2002 Elantra Logo

653 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...