intake manifold with an adjustable wrench. The bolts will be reused. They should not be discarded. 3 Remove the old gasket that was pressed between the intake manifold and the thermostat housing cover
intake manifold with an adjustable wrench. The bolts will bereused. They should not be discarded. Remove the old gasket that was pressed between the intake manifoldand the thermostat housing cover. It
...intake manifold gasket on a 2002 hyundai elantra Remove the intake tube, maf, etc. Undo the fuel line into the rail. be careful fuel will spray if the car has recently ran. cover it with a rag to ...
...intake manifold how do i change the gasket this is simple enough to do but if you are not experianced i would recomend not doing it. first it is a bit labor intensive and second the consequences of ...
...the bolt hole. Basically almost everything on top of the intake will either have to be disconnected or removed. Anything that would stop you from raising up the manifold and removing it. Good
...intake manifold. cost about CD$700 Is your gas pedal OK? It could be a fuel issue, too much fuel going in the engine when it shouldn't. Not sure what causes that, bad valves maybe? I'm just learning ...
this!!!!! who knows!!!! they shouldnt be in the trade! many thanks Dominic Hill Its the intake manifold gasket. I have an 01 elentra that did the same thing and I replaced that and now it runs perfect
...intake manifold and vacuum lines, hoping for a vacuum leak and didn't find anything there either. After replacing the sensors, I disconnected the battery to clear the ECU. After 10 minutes, I ...
Question about Hyundai Elantra
replacing the air cleaner. If it will not solve the problem, then there are several checks to be done.Check if the pump is delivering the right amount of fuel. Check if there are intake manifold leaks
1,684 questions posted
Usually answered in minutes!
1,029 Questions
656 Questions
508 Questions
493 Questions
443 Questions