2000 Land Rover Discovery "turn ignition key alarm sounds" Questions

...Turn ignition switch to RUN Position. Leave Driver door open. Now reconnnect Battery. Turn ignition to OFF. Close door. Mil illumination, (check ingine light), Should come on. ECU can not find Alarm. ...

...ignition and turn. What can I do to reset this so I can remove my key and not have the horn/alarm sound? There is a switch either in or on the driver door that turns on the interior lights and tells ...

...ignition alarms sounds...unable to turn it off. Car able to go into gear and driveable with alarm sounding. Alarm eventually goes off by hitting buttons nothing specific done. Alarm off and car ...

...turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key. Insert the second valid key and turn the ignition switch ON ...

...remains turned on when all lights etc are switched off it is a peugeot 307cc , 2003 year get a new battery for key then put key in ignition and turn on and off 3x times and that should reset ...

...turn the ignition switch ON for at least 3 seconds but no longer than 15 seconds. Turn the ignition switch OFF and remove the first key. 3. Insert the second valid key and turn the ignition switch ON ...

...ignition and turn the vehicle over and the alarm will shut off. Often time just sticking the key into the drivers door is sufficient but the ignition will surely kill the alarm. It has to be the ...

...ignition and turn,the alarm should go off and alarm should be reset.Or,remove positive battery cable,wait 10 minutes,reconnect,when you open door,alarm will sound,insert key in ignition and turn key ...

...turn alarm and immobiliser off Try disconnecting the battery and leaving it overnight. Unlock the car, insert the ignition key and switch on - then reconnect the battery. That sometimes works. If it ...

...ignition is turned. Any ideas? put key in door lock,unlock/hold key over windows will go down....then lock/hold key over,windows will go up,press and hold unlock button on remote for 30 secs,you have ...