2001 Jaguar S-Type "whining noise 2nd gear" Questions

...whining noise started in gearbox and today in tries to stay in 2nd gear if I put my foot down there is no transmission. Then the gearbox fault light came on. Is it worth repairng and if not what will ...

...whining noise when I give my car the gas, it seems to make the high pitch whine just till it gets through the first & 2nd gears, it is an automatic then goes away when my speed increases, but starts ...

stick or hesitate in 1st and 2nd gear,almost have to force it to shift with the gas - no loud noise or whining First signs of the trans going out. rebuild or replace. Have you checked your fluid level

Whining noise at low speed Hi. My 1998 1.5 Mvi has developed a whining noise which appears to be coming from the front off-side. At first, the noise only started when reversing, but it also now ...

...whining noise while changing 1st,2nd, 3rd gears under power. manual transmission indicates counter shaft bearing or clutch shaft input bearing failing reasoning is that for those gears the load is ...

noise from gear box in 2nd gear 3rd gear and 4 th gear it still makes noise when free wheeling 2 but not as bad can u help being a renault, the n/s drive shaft holds the oil in box, it splits, replace

...that makes a high whining noise in 1st 2nd and 5th gear. What could this be? Have you checked the level of gear oil in the transmission?  Remove the fill plug and see if oil is up to the

...while idle or changing gears 1st or 2nd, driving it make a whining noise, i havent changed the timing belt, it has done 102,000 miles, any ideas check your gearbox fluid level may need topped

whining sound in 2 gear in all 4 ranges noise in 2nd gear which is in the main box indicates a chipped tooth or problem teeth on the lay shaft or synchro dog in the box. Check the magnetic plug of the

...whining noise i drive a 2006 golf 1 1.4i.my gearbox makes a whing noise in 2nd and 5th gear.also starting to make the noise but only slightl is my 4th gear.i replaced the thrust bearing and the noise ...