2001 Hyundai Accent "removing rear seat back" Questions

so I had to prop it up while I changed the filter. Ann Remove rear seat, there is an acess panel, remove panel, filter is under that. Before removing filter, release fuel pressure by loosening gas cap

...removing seat is becouse i whant to replace petrol filter. you have to push the seat back towards the rear of the car while pulling it straight up the fuel filter is designed to last the life of the ...

rear seat to replace fuel filter? You have to remove the back lower seat and gain access to the fuel pump. If you follow the fuel lines coming out from the fuel pump and going towards front of the car

...to 108-145 ft. lbs. (150-200 Nm). Turn the brake drum while tightening the spindle nut to seat the wheel bearings. Install the cotter pin and dust cap. Install the wheels Adjust the rear

rear dash board. the covers don't come off. Remove the bottom seat first, then there will be 2 bolts to remove the back rest. Then you can access the speakers. To remove the bottom usually push it

tank to replace it. Some cars require dropping the fuel tank, but others have an access port in the trunk or under the rear seat cushion. Replace the sender and you'll be back up and running correctly

...seat. If this is the case, follow the wires from the rear window light assembly to the point where they plug into the rest of the circuit (inside the trunk) and unplug this wire set, clean the ...

there will be access cover, remove it and there it is. thats corect, its located beneath the back seat 2004 Santa Fe, passenger side rear seatback will not lock into place. any ideas for a resolution?

rear seat(lower section only) and this is don by removing 2 bolts at the back of the lower seat (best accessed from the back of car in the hatch or boot area)! U then unclip seat at the front with one

...rear back seat. Simply remove the rear seat and you should see a small access panel normally secured by 4 screws, unscrew and there will be the pump. The easiest way to check is to get in a quiet ...