1993 Geo Metro "timing set" Questions

...set the timing on 1996 Metro, standard, by jumping plug and reading timing info on my scanner. Also any valve train adjustments for these noisy top ends ? eng. family TSK1.3V5GDFB obdll system is a ...

...to get the timing set on my car the cover is brock for the timingbelt i put a new water pump on and hade to take off the timing belt and now i cant get the timing belt set right rate me "SOLVED"

...set the timing. also you will need to disconnect the vacuum advance to the distributor, and plug the hose to avoid a vacuum leak. (alternate method is to pinch the vacuum advance hose going to the ...

...timing belt. How do I set the cam pulley so I can time it to the crankshaft pully on a 1992 GEO 1 liter eng. I can't find any marks on the camshaft to aline on anything. I found a dot on the ...

...timing light on it! Set it by ear but I can tell it is a little off! Can anybody can send me a pic of a jumper lead installed? Dave how to put the timing chain back on the engin. what i need too know ...

what are the timing marks? marks, do 2 things, allow setting cam timing, and spark timing. https://www.google.com/webhp?gws_rd=ssl#q=metro+timing+marks++3cyl+site:fixya.com if you search, this has ...

...Timing on this 1.0 L Engine is set to 5°±1°BTDC. I uploaded the procedure in .pdf format. You can download it by clicking HERE. I hope this helps you. If you have any more questions or need any more ...

...set the timing at on a 1992 Geo metro 1.3L. I changed the waterpump on the car, now the timing is off an the car wont start. when you re-installed the timing belt did you make sure the timing marks ...

...set the timing but can't seem to locate the distributor. Where is it located? Do you even set the timing on this car? I can't even locate the numbers by the timing belt to even set the degrees BTDC. ...

...set the timing at for my 94 geo metro i have a timing light should i set it at 0? Unless you have replaced the hood or the sticker has been removed, there should be a label on the inside of your hood ...