2002 Suzuki Vitara "remove 3 solenoid egr valve" Questions

...Remove two bolts (3) connecting EGR tube (4) to valve assembly. Remove gasket located between EGR tube flange and EGR valve assembly. Remove two mounting bolts (2). Separate valve assembly (3) from ...

3) from engine. Remove and discard metal gasket located between cylinder head and valve assembly. INSTALLATION Clean area at rear of left cylinder head where it joins base of EGR valve. Clean EGR tube

3) from engine. Remove and discard metal gasket located between cylinder head and valve assembly. INSTALLATION Clean area at rear of left cylinder head where it joins base of EGR valve. Clean EGR tube

...Remove the throttle body resonator.3.Perform the fuel system pressure release procedure (Refer to 14 - Fuel System/Fuel Delivery - Standard Procedure) 4.Disconnect and isolate the negative battery ...

...3 seconds. If the sensor does not respond as specified, check the power and ground circuits. If power and ground circuits are functional, the sensor is faulty. EVR Solenoid Remove the EVR solenoid. ...

...3 parts to the egr --the dpfe[differential pressure feedback egr ]sensor//egr valve//actuator solenoid--++biggest problem with the egr valve is that it gets carboned up and the valve is stuck remove ...

remove the two 10 mm bolts securing the egr valve to the intake manifold. -Using the extension helps, since it's a tight area to work in. Makes the removal and installation so much easier. -Be careful

...3 seconds. If the sensor does not respond as specified, check the power and ground circuits. If power and ground circuits are functional, the sensor is faulty. EGR Valve Control Solenoid Remove the ...

...Remove retaining nuts or bolts (depending upon application) and EGR Differential Pressure Feedback transducer. Installation Follow removal procedure in reverse order. Tighten retaining nuts or bolts ...

...Remove engine appearance cover 2Remove air cleaner outlet tube 3 remove MAF sensor 4 Disconnect sensor wiring from solenoid 5 Disconnect vacuum from solenoid 6 Remove retaining nuts and remove ...