torque converter attaching bolts. Tighten bolts to following torque: 40 ft. lbs. (54 Nm) with 9.5 in. 3-lug converter 55 ft. lbs. (74 Nm) with 9.5 in. 4-lug converter 55 ft. lbs. (74 Nm) with 10.0 in.
...TORQUE CONVERTER DOESNT WANT TO GA ALL THE WAY IN. I assume you have the tranny out and trying to install torque converter.Push converter in as you rotate it.It should line up with notch and lock in. ...
Question about Jeep Liberty
...Torque Converter problem or the Flex plate may be bad. If it has a dust cover, pull it off and inspect everything. I have seen the Torque converter bolts back out. If the bolts are fine, crank it up ...
trouble codes P0740 This DTC P0740 rewfer at Torque Converter Clutch problems.
Code P0740 torque converter problem in transmission
grand cherokee in drive it dies I assume that is only when it is cold, and that it gets better when it warms up? If not, then it sounds like the torque converter is locked up, and needs to be replaced
Question about Jeep Liberty
converter gets red hot website https://big-manuals.com/products/jeep-liberty-complete-workshop-service-repair-manual-2002-2003-2004-2005-2006-2007-2008-2009-2010-2011 and this book helped me repair it
Question about Jeep Liberty
torque converter on mine is bigger than the one on the used one. then it doesn't fit on the used motor. what should I change in order for it to fit in it? engine swaps are complex as is mixing engines
...would be my first guess/replacement, another could be trash in the fuel tank. The final/worst possibility would be problems in the transmission, either a bad torque converter or a sensor going
joints. Play goes away under Torque (accelerating) and returns when parts shift (unload) from Torque like coasting or braking. Transmission or Torque converter not disengaging, hanging up in overdrive
955 questions posted
Usually answered in minutes!
1,658 Questions
839 Questions
768 Questions
735 Questions
207 Questions