2005 Chrysler Pacifica "oil presure sending unit bad" Questions

Ad

Question about Chrysler Pacifica

2 Answers

...Code P0520 Oil pressure switch Oil temp sensor 2006 Dodge... thje po420 need to monitor o2 sensors to verify if you have a bad sensor or bad catalitic converter the po522 oil presure sending ...

Ad

Question about Chrysler Pacifica

1 Answer

oil presure good running 5.2 170,000 miles well nmaintained never gos over 3,000 miles on oil. ran a quart low on last change & the oil presure went to 0. changed oil & filter ok for a few days did it

Ad

...presure raeding since thanks the oil sending unit is bad Change oil sending unit. i would find and replace the oil pressure sending unit although oil pressure is ok the computer needs to know or else ...

Question about Chrysler Pacifica

1 Answer

...oil presure or your oil sensor has gone bad. Start with checking the sensor on the engine. If bad replace. Other wise you need to check the oil sending unit and the oil pump to see if they have gone ...

Question about Chrysler Pacifica

1 Answer

...oil pressure low 2 timeengine open but same problume Maybe the guage or sending unit is bad,,,by a maual guage and check the presure,,,hook it up where the sending unit is on back of engine diverside ...

Question about Chrysler Pacifica

1 Answer

oil presure my question is concerning the oil pump on a 1994 taurus. I wanted to know why I have no oil presure? would it be the oil pump and what drives the oil pump is it the crank or cam. If its an

Question about Chrysler Pacifica

1 Answer

...oil presure ,all oil pressure If the engine runs quiet the gauge in the dash or the oil sending unit is bad. generally the sender on the engine goes bad from the heat of the engine. If the engine ...

Question about Chrysler Pacifica

1 Answer

i have no oil presure replace the oil sending unit first if still no oil pressure then the oil pump may be clogged or just bad

Question about Chrysler Pacifica

2 Answers

van has oil in it, but doesn't register on dashboard gauge replace your oil pressure sending unit. gauge only shows oil presure not the amount of oil may be a bad oil presure switch

...I think the oil presure is to low. It may be blocked or it needs to be replaced. not likely . but you can replace the sending unit with a manua gauge and check it . usualy the sending unit is ...

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

1,661 questions posted

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...