2005 Mercury Mountaineer "dash icon car going down" Questions

dash is displaying Engine failsafe mode. It does not react to the throttle at all. There is also a wrench icon lit. I can't drive it .. how do I fix it? Fail safe is TPS sensor. When you go in

under dash is bent or the switch is out of place. Remove panel below column above gas pedal and check or replace that switch where it attaches to the column under the dash and half-way down the column

...dash lights and gauges go crazy then the car dies? Hopefully this fix helps you. ...

icon shows yellow backlight on dash stays on also the other is red Icon human straped in airbag display just started showing yester day. I dont have a manual Ineed to know if is change of fuses needed

...dash codes that come up eg: water needed,oil, etc thank you what exactly does it look like waves with water with an arrow pointing down low water waves with what looks like a thermometer running hot ...

...dash icon remains on after hookup of new buckle. GM claims not their problem unless pay to determine why. Belt buckle failure and replaced at GM dealer however dash belt icon remains flashing and GM ...

...icon for the car comes on the dash and the light stays on. sometimes it will go out. my battery has run down and I have had to have it jumped. fuse is bad Check the door switch. I think it might be ...

...dash board of icon lights shows a dark area where the ccruise control green circle icon used to be. I can not get it to work at all. I bought this car to go on trips and I need a cruise control what ...

...dash goes black then back on saying system fAILURE shutting down. icon with car and arrows lights up. then suspension fault HELP Sounds like you have a short in the electrical system. I suggest you ...

fuse. Is there a little key icon staying lit on the right side of your dash? If so it's a sentry key, which is an immobilizer key. You need the gray one to start the Jeep the blacks one is not chipped